PCL Accura MK4 Digital Tyre Inflator – 0.53m Hose SCO Connector (DAC404)

Description

Genuine PCL · Part no. DAC404

The PCL Accura MK4 DAC404 is a digital tyre inflator for workshop use, fed from an air line and reading in psi, bar or kPa. Its calibrated range runs from 4 to 250 psi, which takes in truck tyres, and it connects to the valve through a 0.53 m hose with a single clip-on connector.

Good to know

• What does it connect to? A compressed air line, with the inlet rated to 260 psi / 18.0 bar.
• What powers the display? Two AAA batteries, included and replaceable; the backlight stays on in use and switches off after 10 seconds idle.
• Which units does it show? psi, bar and kPa; hold the button for 3 seconds to switch between them.
• Can it be used outdoors? Yes, it is rated IP54 for indoor and outdoor use.

Which one?

Prefer a twin hold-on connector? The PCL Accura MK4 Digital Tyre Inflator – Twin Hold-On (DAC403) is the same Accura MK4 with that end fitted. The PCL Airforce MK4 Tyre Inflator – 0.53m Hose SCO Connector (AFG4H04) has the same 0.53m hose and connector with a lower 0 to 9.6 bar range.

Key features

• Digital readout in psi, bar or kPa, resolving 0.01 bar (0.1 psi)
• Calibrated from 4 to 250 psi (0.3 to 17.2 bar), truck tyres included
• Flows 500 l/min (18 CFM) when fed at 190 psi / 13 bar
• Aluminium body in a rubber bumper, rated IP54
• Backlit screen switches off after 10 seconds unused
• Each unit certified against national approved gauges; complies with BS EN12645:2014

Specification