Workshop Warehouse Terminals Blue Ring 6.4Mm (1/4) Size 6.4 mm (ET26)

Description

Genuine Workshop Warehouse · Part no. ET26

Workshop Warehouse blue ring terminals with a 6.4mm (1/4 inch) hole in the standard length, for 1.5 to 2.5mm2 cable at around 10-15A. For bolting lighting and accessory wires to M6 studs and earth points, where the ring can't slip off as a spade could.

Good to know

• Which ring size? Match the hole to the stud: 6.4mm for M6, 8.4mm for M8 and 10.5mm for M10. Too big a ring makes a poor contact.
• Will it suit my cable? Blue is for 1.5 to 2.5mm2, the size used for most lighting and accessory wiring; red takes thinner cable and yellow thicker.
• How do I make a good earth? Clean the metal back to bare and bright under the ring, then tighten the nut; paint and rust under the terminal cause many faults.

Which one?

Yellow 6.4mm: the Workshop Warehouse Terminals Yellow Ring 6.4Mm (1/4) (ET27).

Key features

• Blue ring terminals
• 6.4mm (1/4in)
• 1.5 to 2.5mm²

Specification