Body Plus Grey Sealant Cartridge – 310ml (IPS03)

Description

Genuine Body Plus · Part no. IPS03

Safety: Danger. May cause an allergic skin reaction. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Read the label before use.

Body Plus IPS03 is the grey version of the Body Plus 310ml body sealant, made for seams and joints that will be primed and painted after repair. A grey bead sits well under most paint colours, so it suits seam sealing on replacement panels, boot floors and door skins before the top coat goes on.

Good to know

• Why grey for paintwork? A mid-grey bead is easy to cover with most top coats, so it needs fewer coats than black and won't show through light colours the way black can.
• How do I get a factory-looking seam? Mask either side, run a steady bead from a cleanly cut nozzle, then tool it smooth with a wet finger or spatula before it skins.
• What can it stick to? Primed and varnished metals, aluminium, wood and duroplastics; bare steel should be primed first so rust doesn't start under the bead.
• Does it suit high heat? Not near exhausts: it is rated -40°C to +90°C, with +120°C only for short spells, so stick to body seams.

Which one?

For a bead that stays on show on black parts, Body Plus Black Sealant Cartridge (IPS02) is the one; for white vans and light trim, Body Plus White Sealant Cartridge (IPS01).

Key features

• 310ml cartridge
• Grey, easy to paint over
• Overpaintable after curing
• Low sag with high extrusion rate
• Suits primed metals, aluminium, wood and duroplastics

Specification