Celsus Adhesive Spray – 90C (CPG4701)

Description

Genuine Celsus · Part no. CPG4701

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes skin irritation. Causes serious eye irritation. Suspected of causing cancer. May cause drowsiness or dizziness. Read the label before use.

Celsus Adhesive Spray is a 500ml aerosol spray mount for car interiors, rated to a maximum working temperature of 90°C so it keeps its hold when a parked car bakes in the sun. Typical jobs are re-sticking a sagging headlining or lifting carpet and trim fabric.

Good to know

• Why does the temperature rating matter? A car parked in summer sun can get far hotter inside than the outside air, and ordinary spray mount softens and lets fabric sag again; this one is rated to 90°C.
• How do I re-stick headlining? Take the board out if you can, brush off the old crumbling foam, spray both the board and the back of the fabric, wait until tacky, then smooth the fabric on from the centre outwards.
• Any precautions? Mask off glass and trim you don't want coated, keep the doors open while spraying and let the car air out before you drive it.

Which one?

For solid panels, rubber and laminate, a brush-on contact adhesive such as Evo-Stik Impact in the 250ml tin (30812365) gives a thicker coat; for small trim pieces, the 65g tube (30812364).

Key features

• Spray adhesive, 500ml can
• Rated to 90°C
• Made for vehicle interior heat
• Spray mount for trim and fabric

Specification