Evo-Stik Foam Filler – 750ml (30803693)

Description

Genuine Evo-Stik · Part no. 30803693

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Suspected of causing cancer. May cause harm to breast-fed children. May cause damage to organs through prolonged or repeated exposure. May cause long lasting harmful effects to aquatic life. Read the label before use.

Evo-Stik Foam Filler is a 750ml can of expanding foam for filling, sealing and insulating gaps and holes in buildings, garages and workshops: around pipes coming through walls, gaps around window and door frames, and voids in brick or blockwork. Once set it can be cut back and sanded flush.

Good to know

• How much should I fill? Fill a gap only partly, because the foam expands as it cures; overfilling pushes out a mushroom of foam and can distort thin frames.
• Is it any good for car bodywork? It is made to bond to building materials; on a car it can hold moisture against steel, so use proper body sealant or cavity wax there.
• How do I tidy it up? Let it set fully, then trim the excess with a sharp knife and sand it smooth; clean wet foam off skin and surfaces straight away, as cured foam has to be scraped off.
• Any safety points? Wear gloves and eye protection, keep the area ventilated, and follow the can's directions on shaking and use.

Which one?

For a waterproof seal round a window or sink rather than a fill, Evo-Stik Multi Purpose White Silicone (30613354) is the bead to use; for car body seams, Body Plus Grey Sealant Cartridge (IPS03).

Key features

• 750ml can
• Expanding foam filler
• Fills, seals and insulates
• Bonds to most building materials
• Can be cut and sanded once set

Specification