Fastglas Resin – 1 Litre (RE/XL)

Description

Genuine Fastglas · Part no. RE/XL

Safety: Danger. Flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. Suspected of damaging fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. Read the label before use.

Fastglas Resin in the 1 litre tin is the resin you brush into glass fibre mat or tissue to rebuild damaged bodywork, building up a hard, reinforced patch over holes and splits. Fastglas say the repair is set and dry in under 30 minutes, and the method is printed on the pack, so it suits a first DIY glass fibre repair as well as a bigger job.

Good to know

• Can I use the resin on its own? Glass fibre resin gets its strength from the mat or tissue it is worked into, so use it with mat rather than on its own as a filler.
• Is the 1 litre tin the right size? It suits larger patches or a few repairs done in one go; for a single small hole the smaller tin is usually enough.
• Is it a fix for rust? Filler and resin do not stop rust, so grind rust back to clean, bright metal before you repair, or it keeps spreading underneath.
• Can it go on structural rust? Rust in load-bearing parts of the body, such as near suspension or seat belt mounts, needs a proper repair, normally welding; filler or glass fibre there fails the MOT.

Which one?

Pair it with the Plastikit Professional Glass Fibre Mat Size 5m2 (FIBRE/5). For a small repair, the 500ml Fastglas Resin (RE/LA) is the same resin in a smaller tin.

Key features

• Glass fibre resin for bodywork repairs
• Works with glass fibre mat or tissue
• Set and dry in under 30 minutes
• Instructions on the pack
• 1 litre tin

Specification