Hylomar Hylotyte Red 100 Jointing Compound – 40ml (F/HYTR100/040M)

Description

Genuine Hylomar · Part no. F/HYTR100/040M

Safety: Danger. Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Read the label before use.

Hylomar Hylotyte Red 100 is a 40ml synthetic, semi-hardening jointing compound for gap filling and sealing pitted or roughly machined faces. It is especially suited to joints in contact with water and antifreeze, such as water pump and thermostat housings, and it also resists salt water, steam and synthetic oils.

Good to know

• When should I choose this over a silicone? On old, pitted or corroded faces in the cooling system, where its gap filling and coolant resistance help seal what a thin bead might miss.
• Can I use it with a gasket? It can be used as a dressing on a gasket on rough faces, but use it thinly so it doesn't squeeze into coolant passages.
• What does semi-hardening mean? It firms up but doesn't set rock-hard, so the joint can still be separated later and cleaned up.
• Is it fine for marine engines? Its resistance to salt water and steam makes it suitable for cooling-system joints on boats as well.

Which one?

For a joint you want to stay soft and adjustable, Hylomar Universal Blue Gasket & Jointing Compound (F/HMMS00B/040G) never sets; for formed silicone gaskets on oily joints, Hylomar 102 RTV Silicone Sealant (F/SL102HY/300M).

Key features

• 40ml
• Semi-hardening synthetic jointing compound
• Fills gaps on pitted or rough faces
• Resists water, salt water, steam, antifreeze and synthetic oils

Specification