U-POL Plastic Primer Filler – Grey – 400ml (PLAS/3)

Description

Genuine U-POL · Part no. PLAS/3

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Read the label before use.

U-POL's grey Plastic Primer Filler is a ready-to-use 400ml aerosol for plastic parts under repair, such as bumpers and trims. It fills small imperfections and sanding marks in the plastic, dries fast and sands easily, and leaves a surface ready for a texture coat or for colour.

Good to know

• How do I get an even coat? Several light coats from an aerosol give a smoother finish than one heavy coat, which can run.
• When can I sand it? Let primer filler dry fully before sanding, or it clogs the paper.
• Will it fill a deep gouge? No, it is for minor marks; a gouge or crack in a rigid plastic part needs a plastic repair filler first, then this primer over the top.
• Textured or painted bumper? Over a textured black trim, finish with texture coat; on a colour-coded bumper, go on with colour once it is sanded.

Which one?

For gouges and cracks in rigid plastic, fill first with U-POL Easy Sand Filler Adhesive (SMCW/2, 1.1 litre) or the carbon fibre reinforced U-POL SMC filler (SMCB/2).

Key features

• Plastic primer filler aerosol
• Fills minor marks and sanding scratches
• Fast drying, easy to sand
• Ready for texture coat or colour
• Grey, 400ml can

Specification