Hammerite Direct To Rust Metal Paint – Hammered Black – 400ml (5084781)

Description

Genuine Hammerite · Part no. 5084781

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Read the label before use.

Hammerite Direct To Rust in hammered black is a 400ml aerosol that primes, undercoats and topcoats metal in one, sprayed straight onto rust or previously painted metal. The hammered finish has a dimpled texture that helps hide pitting and uneven surfaces, which suits gates, railings, trailer frames and tool chests.

Good to know

• Do I have to remove all the rust? No, only loose and flaking rust: wire-brush the surface until what remains is firm, wipe off dust and grease, and spray straight on.
• Is it for car bodywork? It is a metal paint for gates, trailers, racks, brackets and other metalwork, not a colour match for car panels; a bodywork repair needs primer, body colour and lacquer.
• How long between coats? About 4 hours, and two thin coats give better cover than one thick one; the anti-corrosive pigment in it adds a barrier against moisture.

Which one?

For a smooth look, the Direct To Rust range comes in Satin Black (5084778), Smooth White (5084782) and Smooth Yellow (5092968); for hot parts, Hammerite High Heat (5092866).

Key features

• Primer, undercoat and topcoat in one
• Hammered black finish
• Straight onto rust
• Anti-corrosive pigment
• Recoat after 4 hours

Specification