Hammerite Direct To Rust Metal Paint – Hammered Black – 5 Litre (5084796)

Description

Genuine Hammerite · Part no. 5084796

Safety: Warning. Flammable liquid and vapour. May cause drowsiness or dizziness. Read the label before use.

The 5 litre tin of hammered black Hammerite Direct To Rust, sized for big outdoor metalwork such as long runs of railings, several gates, farm trailers or a horsebox chassis. It needs no primer or undercoat on rusty or painted metal, and its textured black finish disguises pitting and old repairs.

Good to know

• Why buy the 5 litre tin? It is for big jobs such as long runs of railings, several gates or a large farm trailer. Using paint from one batch avoids slight colour differences between tins, which show up on large areas.
• Why pick a hammered finish over smooth? A hammered finish hides dents, pitting and uneven surfaces better than a smooth finish, so it is the one for old, pitted metal that will never look new again.
• Should I brush, roll or spray it? Any of the three works with this paint. A brush suits brackets, railings and detailed metalwork, while a roller is quicker on flat panels and doors.

Which one?

The same hammered black also comes in the 2.5 litre (5084795) and the 750ml +33% (5158237) tins. For an even, untextured look, the Smooth Black in 5 litre (5084867); for a softer sheen with 8 years' rated protection, the Satin Black in 2.5 litre (5084907).

Key features

• Hammered black finish
• Primer, undercoat and topcoat in one
• Goes straight onto rust or painted metal
• Brush, roller or spray
• Recoat after 4 hours
• Rated 5 years' protection

Specification