Hammerite Direct To Rust Metal Paint – Smooth White – 400ml (5084782)

Description

Genuine Hammerite · Part no. 5084782

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Read the label before use.

Hammerite Direct To Rust in smooth white is a 400ml spray paint that goes straight onto rust or finished metal and acts as its own primer and undercoat. The smooth, bright white suits metal doors, railings, trailer mudguards and workshop fittings where you want a clean look.

Good to know

• Will a smooth finish show flaws? Yes, more than hammered paint does, so take rust back to a firm surface, feather the edges of old paint with abrasive paper and wipe off the dust before spraying.
• How many coats will white need? Light colours usually need more coats than dark ones over a dark or rusty surface; build it up in thin passes, leaving about 4 hours between coats.
• How do I avoid runs? Shake the can well, spray in steady passes that start and stop off the edge of the part, and keep each coat thin; a run is easier to prevent than to sand out.

Which one?

With a textured finish that hides dents, Direct To Rust Hammered White (5084784); for a bolder colour, Smooth Yellow (5092968).

Key features

• Primer, undercoat and topcoat in one
• Smooth white finish
• Straight onto rust or painted metal
• Anti-corrosive pigment
• Recoat after 4 hours

Specification