PMA Very High Temperature Paint Black Brushcan 250ml (PCPB1002)

Description

Genuine PMA · Part no. PCPB1002

Safety: Danger. Flammable liquid and vapour. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Read the label before use.

PMA Very High Temperature Paint in matt black, a 250ml brushcan for exhausts, manifolds and other metal that gets very hot, rated up to 800°C. The silicone resin base and matt black finish give a factory-style look to a cleaned-up manifold or exhaust section.

Good to know

• Can I paint over the old exhaust paint? High temperature paint should go onto bare, clean metal, as ordinary paint underneath will burn and blister. Wire-brush off rust and degrease the part first.
• Why does it smoke when I first start the engine? Silicone high temperature paints reach full hardness only after the part is heated, so run the engine gently at first and expect some smoke and smell.
• Can I use it on brake calipers? Use a caliper paint there, such as the PMA Caliper Paint brushcans, which give a gloss colour made for calipers; this matt paint is meant for exhaust heat.

Which one?

For a silver finish, the same paint is PMA Very High Temperature Paint Silver (PCPB1001). For brake calipers, PMA Caliper Paint Black (PCPB1004).

Key features

• Rated up to 800°C
• Matt black
• Silicone resin base
• For exhausts and manifolds
• Petrol, chemical and UV resistant

Specification