Workshop Warehouse Sas Nut Lock Medium Strength 50Ml Size 50ml Bottle (SAS2430)

Description

Genuine Workshop Warehouse · Part no. SAS2430

Safety: Warning. May cause an allergic skin reaction. Causes serious eye irritation. Read the label before use.

Workshop Warehouse SAS Nut Lock is a medium strength threadlocker in a 50ml bottle, for stopping metal nuts, bolts and screws shaking loose and sealing their threads against leaks. It fills gaps up to 0.25 mm, works from -40°C to +150°C, tolerates oil, petrol and diesel, and can still be undone with ordinary hand tools.

Good to know

• How do I get it to hold? Clean the threads of oil and grease first, put a few drops on the bolt where the nut will sit, assemble and tighten, then leave it to cure as the bottle directs before loading the part.
• Can I undo it later? Yes, medium strength is made to come apart with normal spanners and sockets; that is why it suits parts you may need to service again.
• Where shouldn't I use it? On plastic fasteners, where it may not cure and can crack some plastics, and on bolts the maker supplies pre-coated or says to fit dry; for wheel bolts and safety-critical parts follow the vehicle maker's instructions.

Which one?

If you would rather use a fixing that locks itself, the Workshop Warehouse Locking Nuts (FIX524) resist vibration without a liquid; the Workshop Warehouse Nylon Lock Nuts Unf 5/16 Size 5/16in. (HNN2) are a nyloc option.

Key features

• Medium strength threadlock
• Locks and seals metal fasteners
• Gap fill 0.25 mm
• -40°C to +150°C
• Resists oil, petrol and diesel
• 50ml bottle

Specification