Workshop Warehouse Setscrews H/T Grade 8.8 M6 X 20 (HSS40)

Description

Genuine Workshop Warehouse · Part no. HSS40

Workshop Warehouse HSS40 is grade 8.8 hex setscrews in M6 x 20, made to DIN 933 in zinc plated steel. A short M6 like this holds small brackets, covers, number plate brackets and lamp mounts to a tapped hole or rivet nut; the pack weighs 1.17 kg.

Good to know

• Will it fit a rivet nut? Yes where the rivet nut is M6 with a standard pitch; choose the length so the screw doesn't push against the panel behind the rivet nut.
• How tight should an M6 be? Firm but not heavy: M6 strips easily, so use a short spanner or a small torque wrench, especially into aluminium or a rivet nut.
• When should I use a stainless screw instead? On parts that are always wet or on show, like number plates and trim, where zinc plated steel will mark with rust in time.

Which one?

A longer M6 from the same maker is Workshop Warehouse HSS46 at 50mm; for M6 setscrews with nuts and washers, see Workshop Warehouse Setscrews Nuts Washers M6 (AB128N).

Key features

• M6 x 20 setscrew
• DIN 933
• Grade 8.8 high tensile
• Zinc plated steel
• Hex head

Specification