Workshop Warehouse Setscrews H/T Grade 8.8 M6 X 50 (HSS46)

Description

Genuine Workshop Warehouse · Part no. HSS46

These Workshop Warehouse HSS46 setscrews are M6 x 50, hex head, grade 8.8 to DIN 933 in zinc plated steel. The extra length lets an M6 pass through a spacer, a pair of brackets or a thick plastic part to a nut behind; the pack weighs 1.10 kg.

Good to know

• Can I clamp plastic with it? Yes, with a large flat washer on the plastic side, and tighten only until the part stops moving, as plastic creeps and cracks if squeezed hard.
• Is a 50mm M6 strong enough for a bracket that sticks out? For light loads, yes, but anything heavy or long that levers on the screw should move up to a thicker screw.
• What nut should I pair with it? An M6 nut with the same pitch; a nyloc on anything that vibrates, renewed each time it is undone.

Which one?

For a short M6 from the same maker, see Workshop Warehouse HSS40 at 20mm; Pearl PHS339B is a 75mm M6 in a box of 50.

Key features

• M6 x 50 setscrew
• DIN 933
• Grade 8.8 high tensile
• Zinc plated steel
• Hex head

Specification