Jubilee Hose Clips M/S 0 16-22mm – Box of 10 (0MS)

Description

Genuine Jubilee · Part no. 0MS

Jubilee 0MS is a box of 10 size 0 worm drive hose clips in zinc protected mild steel, closing from 22mm down to 16mm. That small range suits narrower hoses on a car, and each clip carries the BSI Kitemark for BS 5315:1991 after independent testing.

Good to know

• Will size 0 fit my hose? Measure across the outside of the hose while it is pushed onto its pipe; a reading comfortably inside 16 to 22mm suits this size, while one at the very edge is better served by the next size.
• Where should the clip sit? Sit a hose clip just behind the raised bead or flare on the pipe, with the band square across the hose rather than over the cut end.
• What turns the screw? Jubilee-type clips have a 7mm hexagon head, which a 7mm nut driver or socket turns without slipping.

Which one?

For hoses from 18mm to 25mm, the Jubilee 0XMS is the next size up. If you would rather have a spread of sizes, the Jubilee Workshop Hose Clip Pack M/S – 143 Clips (HCP143MS) includes 13 size 0 clips among its 143.

Key features

• Box of 10 size 0 clips
• Closes from 22mm to 16mm
• Zinc protected mild steel
• BSI Kitemark to BS 5315:1991
• Smooth inside band and rolled edges

Specification