Jubilee Hose Clips M/S 3 55-70mm – Box of 10 (3MS)

Description

Genuine Jubilee · Part no. 3MS

Jubilee 3MS holds 10 size 3 worm drive clips that tighten onto hoses and pipes from 55mm to 70mm across. Made of zinc protected mild steel and Kitemarked to BS 5315:1991, they suit dry, sheltered places; the band's smooth inside and rolled edges look after soft hose material.

Good to know

• Is mild steel right for an outdoor or marine job? Not ideally. Zinc protected mild steel is for dry places; stainless steel clips suit marine, salted and exposed places much better.
• How should I position the screw? Set the screw housing where a driver can reach it square on, as a screw reached at an angle is easy to round off.
• Can it seal a cracked hose? No. It only holds the hose onto its pipe, so a hose that is split, swollen or perished needs replacing first.

Which one?

For a stainless clip in a similar range, the Workshop Warehouse Ace W4 Inox 12Mm Hose Clips 50-70Mm Size 70 (3) (ACE4103) covers 50-70mm with a non-perforated band; the Jubilee 3SS is the stainless 55-70mm option.

Key features

• Box of 10 size 3 clips
• Tightens onto 55mm to 70mm
• Zinc protected mild steel
• Smooth inside band with rolled edges
• Kitemarked to BS 5315:1991

Specification