Jubilee Hose Clips M/S 4X 85-100mm – Box of 10 (4XMSP)

Description

Genuine Jubilee · Part no. 4XMSP

Jubilee 4XMSP gives you 10 size 4X worm drive clips that close from 100mm down to 85mm. In zinc protected mild steel and Kitemarked to BS 5315:1991, they are made for big hoses and pipe sleeves, with a band whose smooth underside and rolled edges protect softer hose.

Good to know

• Is a standard clip enough for a wire reinforced hose? Often not: a stiff spiral wound hose may not squeeze down under a standard clip, which is the job high torque clips are made for.
• Should I reuse the old clips? Replace a clip whose band is rusted, stretched or kinked, or whose screw head is rounded, rather than refitting it.
• What size should my hose measure? The outside of the hose on its pipe should read comfortably inside 85 to 100mm, rather than at the very top or bottom of that range.

Which one?

For wire reinforced suction hose, the Jubilee HT100P is a stainless high torque clip covering 80-100mm. For stainless in this standard style, the Jubilee 4XSSP covers 85-100mm.

Key features

• Pack of 10 size 4X clips
• Closes from 100mm to 85mm
• Zinc protected mild steel
• Smooth underside, rolled band edges
• Kitemarked to BS 5315:1991

Specification