Jubilee Hose Clips M/S 9.5 210-242mm – Box of 5 (9.5MSP)

Description

Genuine Jubilee · Part no. 9.5MSP

Jubilee 9.5MSP is a box of 5 extra large size 9.5 worm drive clips, closing onto diameters from 242mm down to 210mm. Each is zinc protected mild steel, independently tested and Kitemarked to BS 5315:1991, for wide hoses, flexible pipe and sleeve joints well beyond car hose sizes.

Good to know

• Can I fit it round a pipe that is already joined? Yes. A worm drive clip can be undone fully and its band wrapped round a hose that is already on its pipe, so the hose does not have to come off to fit it.
• Where should the screw end up? Set the screw housing where a driver can reach it square on, as a screw reached at an angle is easy to round off; on a clip this size, plan that before you take up the slack.
• Will a mild steel clip last outside? It is zinc protected for dry places; in wet, salted or marine settings stainless steel clips last much longer.

Which one?

The Jubilee 7.5MSP (158-190mm) is the size below and the Jubilee 10.5MSP (235-267mm) the size above, both boxes of 5. For a diameter between fixed sizes, the Jubilee 11mm Multiband Banding Handy Pack M/S – 10 Metre (MB1708) lets you cut a clip to length.

Key features

• Box of 5 size 9.5 clips
• Closes from 242mm to 210mm
• Zinc protected mild steel
• Independently tested, Kitemarked to BS 5315:1991
• Continuously threaded band

Specification