Jubilee Superclamp M/S 64-67mm – Pack of 2 (JSC067MSP)

Description

Genuine Jubilee · Part no. JSC067MSP

A pair of Jubilee Superclamps for large hoses measuring 64 to 67mm across the outside on their pipe: one for each end of a single hose. The single nut and solid trunnion pull a smooth zinc-plated steel band in evenly, and a bridge piece under the joint keeps the seal unbroken around the hose.

Good to know

• What sort of hose is this size for? Big-bore hoses such as air intake, turbo and intercooler pipes, where a plain band pulled in by a nut holds better than a worm drive; measure yours to be sure of the size.
• Why only 2 in the pack? Large hoses usually need one clamp at each end, so a pair does one hose; buy two packs if both ends of two hoses are being done.
• Will it stop a boost hose blowing off? It helps by gripping evenly, but the hose must be pushed fully over the pipe's lip and the clamp sat behind it.

Which one?

The next Superclamps are 56-59mm (JSC059MSP, pack of 5) and 68-73mm (JSC073MSP, pack of 2). For a worm drive clip over this size, see the Pearl Hose Clips M/S 4 70-90mm – Pack of 10 (PHC11X) or the stainless Ace W4 Inox 50-70mm (ACE4103).

Key features

• Superclamp for 64-67mm hoses
• Pack of 2
• For large intake and boost hoses
• Single nut adjustment
• Bridge piece for a full seal
• Chromium VI free zinc plating

Specification