Jubilee Superclamp M/S 74-79mm – Pack of 2 (JSC079MSP)

Description

Genuine Jubilee · Part no. JSC079MSP

This pack has 2 Jubilee Superclamps for hoses of 74 to 79mm outside diameter, such as large air ducts and boost hoses. The plain zinc-plated band is pulled in by a single nut on a solid trunnion, and a bridge piece fills the step at the band joint so the hose is squeezed evenly all round.

Good to know

• Is zinc-plated steel right for my job? For dry places like the engine bay, yes; on a boat, a trailer or kit that lives outdoors in salt and wet, a stainless clamp will last longer.
• Why is the bridge piece there? Without it a band clamp leaves a small step under the joint where air or coolant can creep past; the bridge closes that gap.
• Where should the clamp go? Just behind the raised lip on the pipe end, a little in from the edge of the hose, so the hose is pinned against the pipe where it can't pull off.

Which one?

The 68-73mm (JSC073MSP) and 80-85mm (JSC085MSP) Superclamps sit either side. For a worm drive clip at this size, see the Pearl Hose Clips M/S 4 70-90mm – Pack of 10 (PHC11X).

Key features

• Superclamp for 74-79mm hoses
• Pack of 2
• Bridge piece closes the joint gap
• Single nut on a solid trunnion
• Zinc-plated mild steel
• For ducts and boost hoses

Specification