Carlyle 32mm 12 Point Combination Wrench (CCWFP132M)

Description

Genuine Carlyle · Part no. CCWFP132M

Photo shows the range. Size as stated.

This 32mm Carlyle combination spanner handles the big stuff: a 12-point ring set at a 15 degree offset, an anti-slip open end with radiused corners, hot forged and chrome finished, with a colour filled size mark. 32mm is a common lorry wheel nut size and also turns up on driveshaft and hub nuts on many cars and vans.

Good to know

• Will it undo a driveshaft or hub nut? Those nuts are very tight; they usually come off with a 1/2 inch or 3/4 inch drive socket and long bar, and go back on to the maker's torque, so use the spanner where a socket won't reach.
• Is the open end strong enough at this size? It grips only two flats, so use the ring to break the nut free and the open end for running it off or for nuts on a pipe.
• What should I check first? Measure across the flats of the nut and try the ring on before leaning on it; a spanner that rocks on the head will round the corners off.

Which one?

For more leverage at 32mm, the Carlyle 32mm 12 Point Long Beam Combination Wrench (CCWLNS132M); a size down is the Carlyle 30mm 12 Point Combination Wrench (CCWFP130M).

Key features

• 32mm ring and open end
• 12-point ring, 15 degree offset
• Anti-slip open end with radiused corners
• Hot forged, chrome finished
• Colour filled size mark

Specification

Brand	Carlyle
Part number	CCWFP132M
Weight	0.46 kg
Packed size	426 x 67 x 18 mm
Size	32mm
Ring	12 point, 15 degree offset