Milwaukee 0.91KG/2 Lbs Club Hammer (4932498304)

Description

Genuine Milwaukee · Part no. 4932498304

Milwaukee's 4932498304 is a 0.91kg (2lb) club hammer: a short, heavy head for one-handed work with cold chisels, punches and drifts, on a fibreglass handle with a moulded grip. One face is milled so a chisel head doesn't skate off it, and the other is smooth for parts you don't want marked.

Good to know

• What is a 2lb club hammer for on car work? Driving a cold chisel through a seized nut or rusted bracket bolt, tapping out pins and bushes with a drift, and giving a stubborn part a sharp knock. On panels and alloy parts, a soft-faced mallet does less damage.
• Which face do I use? The milled face on chisel and punch heads, where its grip stops the blow glancing off; the smooth face on anything whose surface matters, as the milled pattern can print into softer metal.
• How do I use it safely? Wear eye protection, strike only chisels, punches and drifts made to be hit, and never hammer another hammer or a spanner, as hardened steel can chip and fly. Holding a punch in locking pliers keeps your fingers out of the way.
• What is the lanyard hole for? It takes a tether, so the hammer can't fall when you are up a ladder, on a roof rack or working above someone else.

Which one?

To hold a punch or chisel at arm's length while you strike, the Milwaukee 5 Piece Locking Plier Foam Insert Set (4932493634).

Key features

• 0.91kg (2lb) head
• Milled face and smooth face
• Reinforced against overstrikes
• Fibreglass handle, moulded grip
• Lanyard hole for a tether

Specification