Milwaukee Fixtec Nut M14 Universal (4932498607)

Description

Genuine Milwaukee · Part no. 4932498607

The Milwaukee Fixtec nut (4932498607) replaces the standard flange nut on an angle grinder with an M14 spindle, on machines from 115mm up to 230mm, so discs change by hand in about 12 seconds with no spanner. At only 8mm thick it leaves more of the disc usable, and it suits grinders with a rapid braking system.

Good to know

• Will it fit my grinder? Check the spindle thread: it must be M14, which is what this nut is made for. It suits grinders from 115mm to 230mm, including ones that brake the disc when switched off.
• What if it jams on after a hard cut? The nut has keyholes, so a standard spanner can shift it if the disc has wound it on too tight. Unplug the grinder or take the battery off before you touch the disc.
• Does a quick-change nut change how I use the grinder? No: keep the guard fitted, use a disc of the diameter the grinder and guard are made for, and check the disc's maximum speed is at least the grinder's no-load speed. Cutting discs cut with their edge only, never their face.

Which one?

For finishing a cut edge in tight places, the Milwaukee Abrasive Belts for Band File – 10×330 G120-10 Piece (4932492876) suit the M12 band files.

Key features

• M14 thread
• Fits 115mm to 230mm grinders
• Tool-free disc changes
• Only 8mm thick
• Works with braking grinders
• Spanner keyholes as a back-up

Specification