Milwaukee Keyless Chuck 1.5-13 1/2×20-1 Piece (4932376531)

Description

Genuine Milwaukee · Part no. 4932376531

A replacement Milwaukee keyless chuck taking bits from 1.5 to 13mm, with a 1/2×20 mounting thread. Fit it to a drill whose old chuck has worn, slips or no longer grips bits straight, so a good drill can carry on drilling brackets, body panels and wood around the garage.

Good to know

• Will it fit my drill? A chuck marked 1/2×20 screws onto a 1/2 inch, 20 threads per inch spindle (1/2-20 UNF); check your drill's spindle thread in its manual or on the old chuck before ordering.
• How do I get the old chuck off? Open the jaws fully and look inside for a retaining screw; if there is one, remove it first (on many drills it has a left-hand thread), then unscrew the chuck from the spindle.
• What bit sizes will it hold? Round or hex shanks from 1.5 to 13mm; very small bits below that need a smaller chuck or a bit holder.

Which one?

For the M12 BDDX drill driver, the Keyless Chuck Fixtec 1.0-10 M12BDDX (4932430444) is the matching chuck; for metal-drilling bits up to 13mm, the Metal Drill HSSCo D338 13.0mm (4932363286).

Key features

• Keyless chuck
• Takes bits from 1.5 to 13mm
• 1/2×20 mounting thread

Specification