Milwaukee VDE diagonal cutter (4932464567)

Description

Genuine Milwaukee · Part no. 4932464567

Milwaukee's VDE diagonal cutter (4932464567) is an insulated side cutter certified to DIN EN/IEC 60900, tested at 10,000 volts and rated to 1,000 volts, with induction-hardened edges. It is for cutting cable and wire in electrical work where live parts may be close by, such as garage circuits or vehicle wiring.

Good to know

• Can I cut a live cable with it? Never cut a live conductor; the insulation protects your hands from nearby live parts, but cutting through a live cable can short it out. Isolate the circuit first.
• Is it suitable for electric cars? VDE tools are rated for live work up to 1000V AC or 1500V DC, but the high-voltage system on electric and hybrid cars should only be handled by trained people.
• Where should I cut? Close to the pivot for the most force, on copper cable and soft wire, keeping the edges sharp for the next job.

Which one?

The Carlyle 152mm Insulated Diagonal Cutting Plier (CIDCP6) is another insulated cutter; the Milwaukee VDE 3 Piece Plier Set (4932464575) adds insulated pliers.

Key features

• VDE insulated diagonal cutter
• DIN EN/IEC 60900 certified
• Tested at 10,000 V, rated to 1,000 V
• Induction-hardened cutting edges
• Cold tested to -40 degrees
• Soft grip handles

Specification