Milwaukee 25 Pcs ThunderWeb HSS Ground Metal Drill Bit Set (4932499767)
£66.29 inc. VAT
24 in stock
Next-day delivery Order by 1pm Monday and it’s with you on Tuesday.
Not sure it’s right for your car? WhatsApp us your reg
- 25 HSS bits, 1mm to 13mm
- 135° split point
- Tapping and clearance sizes
Next-day UK delivery £3.99 (order by 1pm Mon–Fri), or free click & collect from our Bulwell shop —
2–4 Carey Road, NG6 8AT. Choose collection at checkout, then pick it up any time
in opening hours (Mon–Fri 9–5:30, Sat 9–1) — just quote your order number.
Next-day UK delivery £3.99 (order by 1pm Mon–Fri).
Home delivery only: click & collect isn’t available for this item. With items from our shop in the same order, delivery is £5.99 (two parcels).
Description
Genuine Milwaukee · Part no. 4932499767
Milwaukee's 4932499767 is a 25-piece set of ground HSS metal drill bits running from 1mm to 13mm in half-millimetre steps, in a tough ABS case with rubber corners. The THUNDERWEB core thickens towards the shank for strength, and a 135° split point starts the hole without wandering across the metal.
Good to know
- Which bit do I use before tapping a thread? The tapping drill: 5.0mm for M6 and 8.5mm for M10 are both in this set. M8 needs 6.8mm and M12 needs 10.2mm, which a half-millimetre set doesn't include.
- And for a bolt to pass through? Drill a clearance hole: 10.5mm (close) or 11mm (medium) for an M10 bolt, and 13mm (close) for an M12. All three sizes are in the case.
- How do I drill steel without blunting the bit? Low speed, steady pressure and cutting fluid, especially on stainless steel, where a bit that only rubs hardens the metal and blunts itself. A small pilot hole first helps the bigger sizes start and cut.
- Can I drill the car body with it? Yes, for fixings into steel panels, but check behind the panel for wiring, pipes and the fuel tank before you start, and prime the bare edge of the hole afterwards to keep rust out.
Which one?
To cut the thread after drilling, the Milwaukee 38 Piece Metric Tap & Die with Hex Lok 2 -1 Handle (4932498721).
Key features
- 25 bits, 1mm to 13mm in half-millimetre steps
- Ground HSS
- THUNDERWEB core thickens to the shank
- 135° split point
- Polished flutes clear chips
- ABS case with rubber corners
Specification
| Brand | Milwaukee |
| Part number | 4932499767 |
| Barcode (EAN) | 4058546569310 |
| Weight | 1.31 kg |
| Packed size | 76 x 155 x 230 mm |
| Detail | ⌀ 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 /6 / 6.5 /7 / 7.5 / 8 / 8.5 / 9 / 9.5 / 10 / 10.5 / 11 / 11.5 / 12 / 12.5 / 13 mm |
| Point | 135° split |
| Case | ABS with rubber corners |
Additional information
| Weight | 1.309 kg |
|---|
Related products
Milwaukee
More from Milwaukee
Other Milwaukee items on the shelf in Bulwell, all in stock.
Same shelf
Also in Storage & Drilling
More from the Storage & Drilling shelf. See all Storage & Drilling ›
