Holts Exhaust Assembly Paste – 300ml (HMTN0901A)

Description

Genuine Holts · Part no. HMTN0901A

Safety: Warning. Causes skin irritation. Causes serious eye irritation. Read the label before use.

Holts HMTN0901A is a 300ml cartridge of exhaust assembly paste for the joints between pipes, silencers and boxes. Spread on the joint as the system goes together, it seals the connection gas-tight against leaks and stands up to the heat and vibration an exhaust sees, which stops the blowing and ticking an unsealed joint can make.

Good to know

• Do I need a sealant gun? Yes, it comes in a cartridge, so load it into a standard gun; the gun gives a steady bead and makes it easy to work round each joint.
• Where does it go? Round the inside of the outer pipe and the end of the inner pipe at each slip joint, before you push them together and tighten the clamp.
• Will it cure a blowing joint without taking it apart? Not reliably; the paste seals properly only when the joint is apart, cleaned and remade, so plan to loosen the clamp and refit.

Which one?

The Granville Exhaust Assembly Paste Cartridge – 500g (0434B) is the larger cartridge; for a small job without a gun, the Holts Firegum Exhaust Repair Tube – 150g (FG1RP), and for holes or cracks the Granville Exhaust Repair Putty (0431A).

Key features

• 300ml cartridge for a sealant gun
• Gas-tight seal on exhaust joints
• Resists heat and vibration
• Stops leaks at slip joints

Specification