Autotek Stoneguard – Black – 500ml (ATOOSGB500)

Description

Genuine Autotek · Part no. ATOOSGB500

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Read the label before use.

Autotek ATOOSGB500 is a 500ml black stoneguard, a highly flexible rubberised coating that protects against stone chips, scratching, paint cracking and corrosion. Black is the usual choice for wheel arches, underbody repairs, chassis rails and the lower sills of dark vehicles, where it blends in with the factory underseal.

Good to know

• Where does it go? Stone chip coating is used on sills, lower panels and under the arches, where grit thrown up by the tyres hits the paint.
• How do I prepare a rusty arch? Wire-brush off loose rust and dirt, prime any bare metal, then spray the stoneguard in several coats rather than one thick layer.
• Can I change the texture? Spraying distance changes the texture of a rubberised coating, further away usually giving a coarser finish; try a test patch on card first.

Which one?

On a grey or silver car, the Autotek Stoneguard – Grey – 500ml (ATOOSGG500) is less visible on the sills; on white vehicles, see the Autotek Stoneguard – White – 500ml (ATOOSGW500). Prime bare metal first with the Autotek Primer – Red – 500ml (ATOOPRR500).

Key features

• Black stoneguard
• Highly flexible rubberised coating
• Protects against stone chips and scratching
• Helps protect against corrosion
• 500ml aerosol

Specification