PMA Paintstripper Aerosol 500ml (PCPA1041)

Description

Genuine PMA · Part no. PCPA1041

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Read the label before use.

PMA Paintstripper is a 500ml aerosol gel that clings to the surface and lifts old layers of paint, so it works on upright panels and awkward shapes without running straight off. The spray pattern is about 8cm wide, handy for stripping a part, a repair area or stubborn paint on stonework.

Good to know

• What else will it attack? Paint stripper also softens plastics, rubber, seals and any nearby paintwork, so mask or remove anything that should keep its finish, and keep it well away from the rest of the car.
• How do I use it on a metal part? Spray an even layer, leave it for the time on the can until the paint wrinkles, then lift it with a scraper; thick or old layers may need a second go before cleaning the bare metal.
• What should I wear? Chemical-resistant gloves and eye protection, and work outdoors or with plenty of fresh air; wash off any splashes on skin straight away.

Which one?

Autotek Paintstripper (ATOOOPS500) is a non-chlorinated alternative that also shifts charred oil and carbon deposits; after stripping, prime with PMA Primer Grey (PCPA1019).

Key features

• Gel paint stripper, 500ml aerosol
• Clings to upright surfaces
• Spray pattern approx. 8cm
• Lifts old paint layers

Specification