PMA Wheel Paint Steel Aerosol 500ml (PCPA1030)

Description

Genuine PMA · Part no. PCPA1030

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Read the label before use.

PMA Wheel Paint Steel is a 500ml high-gloss acrylic aerosol in a steel-wheel shade, for refreshing steel wheels, spare wheels and trailer wheels. It is fast drying, holds up to wear and scratches, and resists petrol, chemicals and UV, so it stays fresh through winter washes.

Good to know

• What must stay paint-free? Keep paint off the wheel's mounting face and the wheel nut seats; paint there can compress and let the nuts lose tension, so mask them before spraying.
• How do I deal with rust on steel wheels? Wire-brush or sand it back, prime the bare spots, then add colour; painting over flaking paint or loose rust traps it underneath, so it lifts again.
• Does it need lacquer? It is already a gloss finish, but a wheel lacquer on top adds a sacrificial layer against brake dust and cleaning products.

Which one?

Seal it with PMA Wheel Lacquer (PCPA1016); for semi-gloss steel shades, Autotek Wheel Paint Steel (ATOOSTW500) or Simoniz Wheel Steel (SIMW51D).

Key features

• Steel wheel paint, 500ml aerosol
• High-gloss acrylic
• Petrol, chemical and UV resistant
• Wear and scratch resistant
• Fast drying

Specification