U-POL Powercan – Gloss Black – 500ml (PCGB/AL)

Description

Genuine U-POL · Part no. PCGB/AL

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking. Read the label before use.

U-POL Powercan Gloss Black is a 500ml high-build aerosol topcoat for finishing primed surfaces in a high-gloss black, from bull bars, roof racks and chassis parts to trim and smaller panels. The powerful spray lays down more paint per pass, so less is wasted.

Good to know

• Does it need a primer? Yes, it is a topcoat made for primed surfaces; prime bare metal or filler first, then lay the black on in even, overlapping passes.
• How is it different from a standard aerosol? It builds a thicker film per coat from a stronger can, so fewer coats are needed; move a little faster than usual to avoid runs.
• Why does gloss black look rough after drying? Dust and overspray settling on a still-wet coat give a gritty feel; spray in a clean, still space and keep the can at a steady distance.

Which one?

For lower sheen, U-POL Powercan Satin Black (PCSB/AL) or Matte Black (PCMB/AL); for extra protection, U-POL Powercan Clear Lacquer (PCLC/AL).

Key features

• High-build topcoat, 500ml aerosol
• Gloss black
• For primed surfaces
• Durable, flexible finish
• Less paint wasted

Specification