Celsus Aerial Adaptor – Female – 200mm Extension (AAN2103)

Description

Genuine Celsus · Part no. AAN2103

Celsus AAN2103 is a female DIN aerial adaptor on a 200mm lead, for fitting an aftermarket stereo with a male DIN aerial connector. The short lead means you can plug the aerial in with the head unit pulled out of the dash, then slide the unit home without the joint pulling apart.

Good to know

• Why pick the 200mm version? The lead takes the strain off the joint when the stereo is pushed back in, and it lets the connection sit in open space behind the dash rather than wedged against the unit.
• How do I check it will fit? Compare the plug on the car's aerial lead and the connector on the new stereo first; car aerial leads use DIN (Motorola-type), ISO or, on newer cars, Fakra plugs, and these don't fit each other without an adaptor.
• Will a lead lose signal? A short lead like this makes no noticeable difference; just keep the joint away from the stereo's power wiring.

Which one?

Where there is room for a direct joint, the Celsus Aerial Adaptor – Female (AAN2101) is the plain version. If the car's lead is too short altogether, the Celsus Aerial Lead Extension – 1m (AAN2004) adds length.

Key features

• Female DIN aerial adaptor
• 200mm extension lead
• Push fit, no tools
• For aftermarket stereos with a male DIN connector

Specification