Pearl Automotive – Trim Clips (PTC107)

Description

Genuine Pearl · Part no. PTC107

Pearl PTC107 is a plastic push rivet for refitting fascias, dashboards and trim panels, listed at H19.8mm, L14.2mm and H8.5mm. A push rivet has a centre pin: press the body into the hole, then push the pin flush and the legs spread to lock the panel in place. Pull the pin up again to release it.

Good to know

• How do I remove a push rivet without breaking it? Lift the centre pin first with a thin forked tool, then the body comes out easily; prising the whole rivet at once usually breaks it.
• Will it fit my car? Measure the hole and compare the old rivet's head and leg length with the listed H19.8mm L14.2mm H8.5mm before you buy several.
• What if the pin won't lock? The panels may be thicker than the rivet's grip, or not fully closed together; press the panels flat first, then push the pin home.

Which one?

For a slightly larger push rivet, the Pearl PTC109 is listed at H20mm L20mm H7mm; for a small drive rivet, the Pearl PTC115 is listed at H10mm L12mm H6.4mm.

Key features

• Push rivet with centre pin
• Listed as H19.8mm L14.2mm H8.5mm
• Permanent or removable fixing
• For fascias, dashboards and trim panels

Specification