Carlyle 10mm 12 Point Combination Wrench (CCWFP110M)

Description

Genuine Carlyle · Part no. CCWFP110M

This Carlyle CCWFP110M is a single 10mm combination spanner: a 12-point ring at one end, set at a 15 degree offset, and an open jaw at the other. 10mm is the size a home mechanic reaches for most, on engine covers, brackets, battery clamps and earth straps, so a spare or replacement earns its place. Packed length is 159 mm.

Good to know

• Can I use it on the battery clamps? Yes, 10mm suits many clamp nuts. Take the negative lead off first and put it back last, so the spanner can't short the positive terminal to the body.
• 12-point or 6-point for 10mm bolts? This 12-point ring can take a fresh grip every 30 degrees, handy in a cramped bay. For rusty or part-rounded heads, the 6-point version of this spanner grips the flats and is less likely to slip.
• Which end does what? Break the bolt loose and do the final tightening with the ring, which grips all round; swap to the open jaw to spin it off quickly once it's free.

Which one?

If you're short of more than just a 10mm, the Carlyle 11 Piece 12 Point Combination Wrench Set 9 to 19mm (CCW1211M) covers 9mm to 19mm in the same pattern; for tight 10mm bolts in awkward places the Carlyle 12 PT 10mm 180P Ratcheting Combination Wrench (CRW110M) saves refitting the spanner each stroke.

Key features

• Hot-forged steel
• 12-point ring with 15 degree offset
• Anti-slip open jaw with radiused corners
• Colour-filled size marking
• Chrome finish against corrosion

Specification