Carlyle 14mm 6 Point Combination Wrench (CCWFP014M)

Description

Genuine Carlyle · Part no. CCWFP014M

Photo shows the range. Size as stated.

This Carlyle CCWFP014M is a 14mm combination spanner with a 6-point ring, for 14mm heads that have corroded or started to round. 14mm is common on brake calipers and mounts, which see plenty of road dirt and water, so a ring that grips the flats rather than the corners is worth having. Packed length 190 mm.

Good to know

• What makes a 6-point ring better on rusty bolts? It bears on the flat sides of the hex, away from the corners, so it can turn a corroded 14mm head that a 12-point ring might slip on.
• The bolt has rounded slightly – can I still use a spanner? Often a 6-point ring will still grip worn corners. If the head is badly rounded, a bolt extractor is the answer.
• How do I treat a stuck caliper or mount bolt? Soak it with penetrating oil and leave it, then pull steadily. Never extend the spanner with a pipe or hit it with a hammer.

Which one?

The Carlyle 13 Piece 6 Point Combination Wrench Set 7mm to 19mm (CCW613M) covers 7mm to 19mm in 6-point; on clean 14mm bolts in tight space, the 12-point Carlyle 14mm 12 Point Combination Wrench (CCWFP114M) re-grips sooner.

Key features

• 6-point ring grips the flats
• 15 degree offset ring end
• Anti-slip open jaw, radiused corners
• Hot-forged steel
• Chrome finish

Specification

Brand	Carlyle
Part number	CCWFP014M
Weight	0.10 kg
Packed size	190 x 30 x 9 mm
Size	14mm
Ring end	6 point, 15 degree offset