Carlyle 3/8 Drive 19mm Open-End Crowfoot Wrench (CCF3819M)

Description

Genuine Carlyle · Part no. CCF3819M

This Carlyle CCF3819M is the 19mm crowfoot: an open 19mm jaw with a 3/8in square drive for a ratchet, extension or 3/8in torque wrench. 19mm is the usual M12 head, and the crowfoot lets you torque the ones that sit under a pipe or bracket where a socket has no way on. Chrome plated, mirror polish.

Good to know

• Can I use it on large pipe fittings? It will reach them from the side. Hold the fitting body still with a second spanner while you turn the nut, so the pipe doesn't twist.
• Is it for heavy loosening work? No. 19mm nuts are often very tight, and an open jaw can spread; free them with a ring spanner or breaker bar, then run them with this.
• Does the angle on the torque wrench matter? Yes. At 90 degrees to the handle the reading is unchanged; pointing straight out, it lengthens the wrench and over-tightens the nut.

Which one?

The Carlyle 10 Piece 3/8 Drive Metric Crows Foot Spanner 10mm – 19mm (CCF10M) covers every size up to this one; for hand work on 19mm nuts, the Carlyle 19mm 12 Point Combination Wrench (CCWFP119M) is quicker.

Key features

• 19mm open-ended crowfoot
• 3/8in square drive
• Fits 3/8in torque wrenches
• For hard-to-reach nuts
• Mirror-polished chrome plating

Specification