Motip Leak Detector (090406)

Description

Genuine Motip · Part no. 090406

Safety: Danger. Pressurised container: may burst if heated. Causes serious eye damage. Read the label before use.

Motip's Leak Detector is a spray that foams into bubbles wherever gas or air is escaping, for checking fittings on gas pipes, LPG bottles, compressor lines and air hoses. It is DVGW certified (number NG/5170BR0105), rinses off with water afterwards, and a little goes a long way on each joint.

Good to know

• How do I find a leak? With the system under pressure, spray the joint and watch for a minute; a slow leak builds a slowly growing foam, a bad one blows bubbles straight away.
• Is it safe for gas fittings? It is made for them, which is what the DVGW listing covers; keep flames away while testing, and if you smell gas, turn the supply off and call the gas emergency line.
• Will it find a puncture or a leaking tyre valve? Yes, it shows slow tyre and valve leaks the same way; rinse it off the wheel and valve with water afterwards.

Which one?

A different job from the lubricants in this range: for drying damp electrics, see the WD-40 Specialist Contact Cleaner – 400ml (44376).

Key features

• Leak detection spray
• Bubbles show escaping gas or air
• DVGW certified
• Removes with water
• High yield

Specification