PMA Belt Slip Aerosol – 500ml (BSLIP)

Description

Genuine PMA · Part no. BSLIP

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Read the label before use.

PMA Belt Slip is a 500ml aerosol of thick, sticky dressing that helps a slipping drive belt grip its pulleys again and quietens squeals. It is made for V belts, flat belts and round belts on conveyors, workshop machines, older engines and garden machinery, and it also resists oxidation on the belt.

Good to know

• Will it cure a squealing fan belt on my car? A squealing auxiliary belt usually means it is worn, glazed, contaminated or not tensioned properly, so a dressing quietens it but doesn't cure the cause; check the belt and tensioner first.
• Which belts is it for? The can lists V, flat and round belts; on modern ribbed multi-groove belts, follow the belt or vehicle maker's advice before using any dressing.
• How do I apply it safely? Keep hands, sleeves, hair and the nozzle well clear of moving pulleys, use short bursts on the belt's inner face where it meets the pulley, and wipe away any overspray.

Which one?

If the noise is a dry pivot or hinge rather than a belt, a general lubricant such as the PMA Multi-lube Aerosol – 500ml (MLUBE) is the better choice.

Key features

• Belt dressing aerosol
• Stops belt slip and squeal
• V, flat and round belts
• Resists oxidation
• Helps belts last longer

Specification