PMA White Grease Aerosol – 500Ml (WHGR)

Description

Genuine PMA · Part no. WHGR

Safety: Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Causes skin irritation. May cause drowsiness or dizziness. Toxic to aquatic life with long lasting effects. Read the label before use.

PMA White Grease is a 500 ml aerosol of calcium-based grease with PTFE, carried in a solvent that evaporates quickly and leaves a thick white coat. It is meant for metal parts in wet and humid places, such as door hinges and check straps, bonnet catches, tailgate hinges and trailer jockey wheels, working from -20C to +110C.

Good to know

• Why does white grease help? You can see where it has gone and how much is left, which makes it easy to check catches and hinges at a service.
• Is it good for a bonnet catch? Yes, and that is a safety point: a stiff bonnet catch may not latch fully, so clean the old dirt off and give it a coat at each service.
• Are there temperature limits? It is rated from -20C to +110C, so keep it away from exhaust parts and turbos, and on very hot bearings use a high temperature bearing grease.

Which one?

For rubber seals and plastics, the PMA Silicone Lubricant Aerosol – 500Ml (SLUBE); for a lithium grease spray rated to +145C, the WD-40 Specialist White Lithium Grease – 400Ml (44391).

Key features

• 500 ml aerosol
• Calcium-based grease with PTFE
• Fast-evaporating carrier leaves a thick coat
• For wet and humid conditions
• -20C to +110C

Specification