Carlyle Insulated screwdriver PH 0 x x 60mm (SDPI02)

Description

Genuine Carlyle · Part no. SDPI02

The Carlyle SDPI02 is a small insulated Phillips screwdriver with a PH 0 tip on a 60mm shaft. It is meant for fine cross-head screws where wiring may be close by: switch panels, terminal blocks, small lamp fittings and electronic housings. The insulation is rated to 1,000 volts AC/DC and carries GS and VDE marks.

Good to know

• Which screws does a PH 0 tip suit? Only the smallest Phillips heads, such as those on small switches and terminal blocks; on a larger screw it will spin out and round off the head.
• Does the insulation mean I can work on a live circuit? Treat it as a second line of protection if you slip; the safe habit is still to disconnect the battery or isolate the circuit first whenever you can.
• How do I know it is still safe to use? Look over the coloured insulation before every job and retire the screwdriver if it is cut, cracked or worn through anywhere on the shaft or handle.

Which one?

For mid-size cross-head screws pick the PH 1 x 80mm (SDPI13), or the PH 3 x 152mm (SDPI36) for large ones; for a full insulated kit see the Carlyle 18 Piece 3/8in Drive Insulated Tool Set VDE (NCEH018S).

Key features

• Phillips PH 0 tip on a 60mm shaft
• Insulated to 1,000 V AC/DC
• GS and VDE certified
• Made to IEC 60900 and ASTM F1505
• Magnetic tip holds small screws

Specification