Ring Analogue Tyre Pressure & Tread Depth Gauge Set (RTG2)

Description

Genuine Ring · Part no. RTG2

The Ring Analogue Tyre Pressure & Tread Depth Gauge Set (RTG2) gives you a pencil style pressure gauge reading in PSI and bar, and a tread depth gauge reading 0-25mm, for cars and light commercial vehicles. At 145mm long, the pressure gauge slips into a door pocket or jacket.

Good to know

• How do I read a pencil gauge? Press it squarely onto the valve until the hiss stops, then pull it off and read where the sliding bar stopped; take two readings and reset the bar between them if they disagree.
• How do I use the tread gauge? Push the probe into a main groove, not onto a wear bar, and check the inner, middle and outer tread; uneven wear across a tyre often points to wrong pressures or tracking that needs checking.
• Is analogue as good as digital? For regular checks, yes, and it never needs a battery; a digital gauge is easier to read in poor light and to a finer step, so pick by how and where you will use it.

Which one?

For a digital gauge that does pressure and tread in one, see the Ring Digital Tyre Pressure & Tread Depth Gauge (RTG6); to put the air in as well, the Ring Ultra Inflate 20 (RTI120T).

Key features

• Pencil style analogue pressure gauge
• Reads PSI and bar
• Tread depth gauge, 0-25mm
• For cars and light commercial vehicles

Specification