Milwaukee 21 mm MAX BITE flexible head ratcheting combination spanner -1 Piece (4932480194)

Description

Genuine Milwaukee · Part no. 4932480194

A 21 mm combination spanner from Milwaukee's MAX BITE range, with a ratcheting ring end on a head that pivots through 180° and an open jaw shaped to hold the flats of a nut without rounding it. It suits larger nuts and bolts on suspension arms, subframes and towing brackets where a socket and ratchet handle won't fit.

Good to know

• When does the ratcheting ring save time? On long threads where you would otherwise lift and refit a plain spanner every few degrees; with 144 tooth positions it picks up the next one after a 2.5° swing.
• Can I tighten wheel nuts or suspension bolts to torque with it? No, a ratcheting spanner has no torque setting; run the nut down with it, then finish with a torque wrench set to the figure in the workshop manual.
• Is 21 mm the size I need? Try the ring over the hex before you lean on it; if it rocks on the flats, it is the wrong size or the head is worn, and forcing it will round the corners.

Which one?

Neighbouring sizes in the same range are the Milwaukee 20 mm MAX BITE spanner (4932480193) and the 22 mm (4932480195), neither on the site yet.

Key features

• 21 mm ring and open end
• Ratcheting ring with 144 positions
• Head pivots through 180°
• MAX BITE open-end grip
• Chrome-plated alloy steel
• Ink-filled size label

Specification