Milwaukee Multi Material Drills Gen 2 (4932493872)

Description

Genuine Milwaukee · Part no. 4932493872

A Milwaukee set of second-generation multi-material drill bits for fixings around the garage and workshop. The set list names 4, 5, 5.5 (twice), 6, 7, 8 and 10 mm bits: the 4 mm is 100 mm long, the 5 to 7 mm bits are 108 mm and the 8 and 10 mm bits are 120 mm.

Good to know

• Which bit do I need for a wall plug? Match the drill bit to the size printed on the wall plug packet, and drill a little deeper than the plug is long so it can sit flush with the surface.
• What will multi-material bits drill? Multi-material drill bits are made to drill several materials, such as brick, wood and plastic, with one bit, which saves changing bits when a fixing goes through a panel into the wall behind. For repeated holes in steel, a bit made for metal is the better choice.
• Why are the bits different lengths? The bigger sizes are longer, at 120 mm for the 8 and 10 mm, giving reach through board or thick timber, while the 4 mm bit is the shortest at 100 mm, which keeps a small bit stiffer for pilot holes.

Which one?

For steel, the Milwaukee 10 Piece Shockwave HSS-G Tin Red Hex Set (4932493865) is made for metal; to drill and cut a thread in one go, see the 1/4 Drive HSS-G Combi Drill Tap Set (4932498267).

Key features

• Second-generation multi-material bits
• Sizes from 4 mm to 10 mm
• 4 mm bit 100 mm long
• 5 to 7 mm bits 108 mm long
• 8 and 10 mm bits 120 mm long

Specification