Milwaukee 3/8” Drive Metric Standard 12-Point Socket – 9mm (4932498801)

Description

Genuine Milwaukee · Part no. 4932498801

Milwaukee's 9mm socket in 3/8in drive: a short, 12-point chrome socket for the smaller nuts and bolts you meet on brackets, trim and engine-bay fittings. It is sold on its own, so it can replace one lost from the 12-piece 8mm to 19mm set or fill the gap in a mixed kit where the 9mm never existed.

Good to know

• How do I know the head is 9mm and not 10mm? Try the 9mm first: if it is slightly loose, go up a size, but never carry on with a socket that wobbles, as it will round the corners of the head.
• Is 3/8in drive right for a 9mm bolt? For most engine-bay work it is the handy size; a 1/4in drive is lighter for trim screws, and a 1/2in drive is far more than a small bolt needs.
• Can I snap a small bolt with it? Quite easily on a long ratchet, so pull gently, and where the manual gives a tightening figure for a small fixing, use a small torque wrench.

Which one?

If the nut sits on a long stud, the deep 9mm (4932498813) reaches over it; for the whole run of sizes, the Milwaukee 3/8IN MET 12 Piece 12PT Socket SET (4932498795).

Key features

• 9mm, 12-point
• 3/8in drive, short body
• Anti-roll flat sides
• Spanner can turn the flats
• Stamped size
• Corrosion-resistant chrome

Specification