Milwaukee Hex socket ShW 1/2 STD 19mm-1 Piece (4932480313)

Description

Genuine Milwaukee · Part no. 4932480313

A 19mm ShockWave impact socket on 1/2in drive, standard length and 6-point. 19mm is one of the most common wheel nut sizes and also turns up on suspension and subframe bolts, so it is one of the hardest-working sockets in a garage that does its own wheels and suspension.

Good to know

• Will it fit into my alloy wheels? A standard impact socket has a thicker wall than a dedicated wheel-nut socket; if the bolt holes in your wheels are narrow, a thin-walled wheel socket avoids scraping the alloy.
• Can the gun do the final tightening? No; spin the nuts on, then tighten them with a torque wrench in a cross pattern to the handbook figure, and re-check after a short drive.
• When should I loosen wheel nuts? With a breaker bar, crack them loose while the wheel is on the ground, then lift the car; with the wheel in the air it just turns.

Which one?

For a thin-wall wheel socket, the Milwaukee HEX Socket SHW 0.5 AUTO 19MM (4932493372) or the live Carlyle 1/2 Drive 19mm Alloy Wheel Sockets (CWS1219M); for long threads, the deep 19mm (4932480337).

Key features

• 19mm, 6-point
• 1/2in drive impact socket
• Standard length
• Non-slip hex grip
• Pin and ring holes

Specification