Wot-Nots Fuse Holder – Self Stripping Blade Type – Blue (PWN200)

Description

Genuine Wot-Nots · Part no. PWN200

Wot-Nots PWN200 is a blue fuse holder for standard blade fuses that joins onto existing cables with a self-stripping clamp, the scotch-lock type. Lay the two cables in the housing and squeeze it shut with pliers; no separate connectors are needed, which makes it a quick way to fuse an accessory feed.

Good to know

• Do I need special tools? Just a pair of pliers to close the clamp; squeeze it fully and evenly so the blade inside cuts through to the copper.
• Which cable sizes suit it? The cable range isn't stated, so check that your wires seat snugly in the channels before clamping; loose ones make a poor contact.
• Is it for heavy loads? For high-current feeds a crimped or soldered in-line holder is the sturdier choice; keep this one for light accessory work.

Which one?

For a holder you splice in with crimps or solder, the Workshop Warehouse In-Line Standard Blade Fuse Holders (EFH150) takes standard blades with a pre-wired loop. Fitters wiring several jobs may prefer the Pearl Fuse Holder – Standard Blade Type – Pack of 15 (PFH268R).

Key features

• Takes standard blade fuses
• Self-stripping scotch-lock housing
• No connectors needed
• Closed with pliers
• Blue

Specification