Carlyle Socket – Shallow Impact – Metric – 1/2in Drive – 14 mm (61-4114)

Description

Genuine Carlyle · Part no. 61-4114

A shallow 14mm impact socket with a 1/2in square drive, for impact wrenches, air guns and breaker bars. Fourteen millimetre heads are common on M10 bolts on Japanese cars, and the short body keeps the gun close where there is little room above the head.

Good to know

• Is 14mm right for my M10 bolts? Often on Japanese makes; European cars more usually have a 16mm or 17mm head on M10.
• Is it safe on a hand ratchet? Yes, impact sockets work by hand too, though they are bulkier than chrome sockets.
• How should M10 bolts be refitted? Run them in, then tighten to the vehicle maker's figure with a torque wrench rather than relying on the gun.

Which one?

For a nut on a long stud, the Carlyle Socket – Deep Impact – Metric – 1/2in Drive – 14 mm (61-4314); for hand use only, the Carlyle Socket – Shallow – Metric Standard – 1/2in Drive – 14 mm (S12014M). For angled access on the gun, the Carlyle 1/2 Drive Universal Joint Impact (CIUNIV12).

Key features

• 14mm shallow impact socket
• 1/2in square drive
• Metric size
• For impact and air tools

Specification