Ring H7 Ceramic Bulb Connector (RBH005)
£2.19 inc. VAT
1 in stock
Next-day delivery Order in the next 1h 48m and it’s with you tomorrow.
Not sure it’s right for your car? WhatsApp us your reg
- H7 ceramic connector
- 130mm cable
- Heat-resistant body
Description
Genuine Ring · Part no. RBH005
Ring's RBH005 is an H7 bulb connector with a ceramic body, for repairing a headlamp whose original plug has melted, burnt or come loose. It has a straight cable exit and 130mm of cable rated at 8.2A, and it works at more than one voltage.
Good to know
- Why ceramic? It copes with the heat at the back of a halogen bulb better than a plastic plug, which is why melted plastic connectors are often replaced with one.
- Is my bulb H7? Check the handbook or the marking on the old bulb's base; H7 is a single-filament bulb with two pins, so this won't suit other bulb types.
- How do I fit it? Disconnect the battery, cut back to clean copper, join each wire with a crimp or solder and heat-shrink, matching the old wires; if unsure, have an auto electrician fit it.
- Why did the old one melt? Usually poor contact or corroded pins making heat; fit a new bulb with the new connector and check the wiring isn't scorched further back.
Which one?
With a part loom instead of loose tails: Wot-Nots Bulb Holder H7 With Part Loom (PWN666); for H4 lamps, PWN665.
Key features
- H7 bulb connector
- Ceramic body
- 130mm cable
- 8.2A cable rating
- Straight cable exit
- Multi-voltage
Specification
| Brand | Ring |
| Part number | RBH005 |
| Barcode (EAN) | 5055175229904 |
| Weight | 0.03 kg |
| Packed size | 35 x 87 x 116 mm |
| Bulb | H7 |
| Cable | 130mm, rated 8.2A |
| Cable exit | Straight |
Additional information
| Weight | 0.028 kg |
|---|
Ring
More from Ring
Other Ring items on the shelf in Bulwell, all in stock.
Same shelf
Also in Bulbs & Horns
More from the Bulbs & Horns shelf. See all Bulbs & Horns ›













