Apec Engine Flushing Oil – 5 Litre (A3505L)

Description

Genuine Apec · Part no. A3505L

Safety: Warning. Causes serious eye irritation. Read the label before use.

Apec Engine Flushing Oil is a 5 litre cleaning oil that goes in for a short run between draining the old engine oil and filling with new. It loosens sludge and carbon deposits so that they drain out with it, giving the fresh oil a cleaner engine to start in. It is not an oil to drive on.

Good to know

• How do I use it? Drain the old oil, fill the engine with the flushing oil, then start it and leave it idling for 10 minutes. Drain the flushing oil out and refill with the right new oil for your car; the car is not driven while the flush is in.
• Should I change the filter as well? Yes, as a rule. Fit a new oil filter when the fresh oil goes in. The new oil must be the grade and approval code your handbook gives.
• Any safety points? Hot oil can scald, so wear gloves and let the engine cool a little before draining it. Take used oil to a council recycling centre in a sealed container; never pour it down a drain.

Which one?

This is our engine flush. For the fresh oil afterwards, use the grade and approval your handbook gives, for example the Castrol GTX 5W-30 A5/B5 Engine Oil 5L (15F6F2) where an A5/B5 5W-30 is asked for.

Key features

• Engine flushing oil
• Loosens sludge and carbon deposits
• Runs at idle for 10 minutes, then drains out
• Used between the old oil and the new
• 5 litre pack

Specification

Brand	Apec
Part number	A3505L
Barcode (EAN)	5063485183861
Weight	4.39 kg
Packed size	196 x 130 x 310 mm
Detail	1.Drain the used engine oil
Detail	2.Refill with APEC Engine Flushing Oil
Detail	3. Start the engine and idle for 10 minutes
Detail	4. Drain the Flushing Oil and replace with the correct new engine oil
Type	Engine flushing oil
Volume	5 litres
Run time	10 minutes at idle

Not sure which oil your car takes? See our engine oil guide by grade and car.